Saltar al contenido

Hair Transplant Instruments and Consumables List

Instruments and consumables for every phase of the procedure: FUE punches and micromotors, sapphire blades, DHI implanter pens, forceps, graft storage, sterile consumables and PRP, with a per-case consumption table.

6 min de lecturaActualizado el 18 de noviembre de 2026
Este contenido es información técnica para profesionales sanitarios y no constituye asesoramiento médico.
FUE punch, DHI implanter pen and sapphire blade illustration – cover of the hair transplant instruments guide
Instruments and procedure consumables used in FUE, DHI and sapphire techniques.

Instruments by phase of the procedure

A hair transplant has four main phases: graft extraction, channel opening, implantation, and the preparation and storage of grafts in between. Each phase has its own instruments and consumables. This guide lists them in order, then gives an example per-case consumption table and purchasing checkpoints. Technique and method remain the physician's responsibility; quantities are planning examples.

1. Extraction: FUE punch and micromotor

The FUE punch is the cylindrical cutting tip that separates the follicular unit from surrounding tissue. Three parameters matter when buying:

  • Diameter: 0.7–1.0 mm. Typically 0.7–0.8 mm for single and double units, 0.85–0.95 mm for multi-unit grafts and coarse hair, 0.9–1.0 mm for beard and body donor. Confirm whether the stated value is inner or outer diameter.
  • Edge type: sharp, blunt or hybrid.
  • Shaft: 2.35 mm is the most common; handpiece compatibility is listed on the product page.

Long Hair FUE punches have an open side window so hair need not be shaved. See the FUE punch buying guide, FUE Punch.

Manual punch holders suit low-volume precision work; FUE micromotors with adjustable speed (typically 500–5,000 rpm) and torque control give speed and repeatability in long sessions. A motor system consists of a control unit, handpiece, foot pedal and punch adapters; plan one spare handpiece per room. See FUE Motors and FUE Accessories.

FUE punch and micromotor handpiece – graft extraction illustration

1. Extraction

FUE punch and micromotor

In extraction, punch diameter and edge geometry determine the transection rate.

2. Channel opening: sapphire blade and holder

Sapphire blades are single-use blades made of synthetic sapphire that open the recipient channel. Their smoother surface and finer edge create narrower channels than steel.

  • Width: 1.0–1.5 mm in 0.1 mm steps; 1.0–1.1 mm for singles, 1.2–1.3 mm for doubles, 1.4–1.5 mm for multi-unit grafts.
  • Profile: U profile gives a rounder channel base, V profile a sharper one.
  • Holder: titanium or stainless steel with adjustable depth stop; plan two per physician.

See the sapphire blade size guide, Sapphire Blade and Sapphire Blade Holder.

3. Implantation: DHI implanter pen (Choi pen)

In DHI the channel is opened and the graft placed in one motion. The pen body is reusable and autoclavable; the needle is a sterile single-use consumable.

  • Needle diameter: 0.6–1.2 mm; 0.6–0.8 mm for singles, 0.9–1.0 mm for doubles and triples, 1.1–1.2 mm for coarse multi-unit grafts.
  • Bodies: 4–6 per team, since loading and placing run in parallel.
  • Compatibility: confirm needle and body belong to the same system.

See the DHI implanter pen guide, DHI Implanter Pen and DHI Needle.

DHI implanter pen, sapphire blade and holder – incision and implantation instruments illustration

Incision and implantation

Sapphire blade, holder and DHI pen

The sapphire blade opens the channel; the DHI pen opens and implants in one step.

4. Forceps

  • Extraction forceps: fine-tipped, usually curved jeweler type, to lift the loosened graft.
  • Sorting forceps: 11 cm straight jeweler forceps for counting and grouping grafts in petri dishes.
  • Placing forceps: 11 cm, 45° angled or curved fine tips; some teams prefer 90°.

Plan at least two per team member and replace forceps whose tips no longer align. See Graft Preparation and Forceps.

5. Graft preparation and storage

  • Counting tray: LED-lit, black or white base; one per room.
  • Sterile petri dishes: 10–20 per case.
  • Cooled holding box: keeps dishes at 4–8 °C; one per room.
  • Holding solution: isotonic or dedicated graft storage solutions.
  • Magnifier or microscope: for graft quality assessment.

See Graft Preparation and Graft Storage.

6. Procedure consumables

  • Sterile drapes and packs: table cover, fenestrated head drape, patient drape, or a ready-made procedure pack. Surgical Consumables, Hair Transplant Supplies
  • Gloves, gowns, caps, masks: sterile surgical gloves for the physician and placing team, nitrile examination gloves for other tasks. Gloves
  • Syringes and needles: 1, 5, 10 and 20 ml syringes and 27G–30G needles for local anaesthesia and tumescence. Syringes
  • Sponges and dressings: sterile 10x10 sponges, gauze, tape, elastic bandage. Wound Care
  • Scalpel blades: No. 10 and No. 15. Scalpel Blades
  • Antiseptics and disinfectants. Sterilisation

7. PRP, PRF and mesotherapy

Gel or citrate PRP tubes (2 per application), PRF tubes, winged sets, a centrifuge, 30G–33G mesotherapy needles and 1 ml syringes. See PRP tube selection. The Demir Med catalogue does not include PRP tubes or mesotherapy products; for hair transplant consumables see Hair Transplant Supplies.

8. Post-procedure

Neck pillow, headband, saline spray, mild shampoo and care instructions. See Patient Care.

Example consumption per case

Values below are for a single-session 3,000-graft FUE + sapphire case; adapt them to team size and technique.

Product Qty / case Note
FUE punch 2–3 Per diameter used
Sapphire blade 2–4 Per width used
DHI needle (DHI case) 15–25 Keep one box per diameter
Sterile petri dish 10–20
Sterile surgical gloves 4–6 pairs
Examination gloves (non-sterile) 20–30 Preparation and cleaning
Sterile gowns 2–3
Sterile drapes (table + fenestrated) 1 + 2 Or one procedure pack
Syringes (mixed volumes) 10–15
Needles 27G–30G 10–15
Sterile sponges 10x10 20–40
PRP tube (if applied) 2
Mesotherapy needle 30G 2–4
Cap, mask, shoe covers 1 set per team member

Purchasing checkpoints

  • Sterility: punches, sapphire blades, DHI needles and petri dishes come in individual sterile packaging with method and expiry on the label.
  • Single use: items labelled single-use are not reused; confirm autoclave suitability for reusable bodies and holders.
  • Compatibility: punch shaft to handpiece, DHI needle to pen body, sapphire blade to holder, as listed under "Compatible products".
  • Lot tracking: keep lot numbers of punches, blades and needles in case records.

Clinic setup and supply plan

Per-room equipment and per-case consumables for new or expanding clinics are in the hair transplant clinic equipment checklist. All hair transplant instruments, devices and consumables are priced by quotation; add products to your quote list and state your monthly case volume. In-stock consumables confirmed before noon ship same day in Istanbul and in 1–3 business days across Turkey. Main category: Hair Transplant Supplies.

Preguntas frecuentes

An FUE punch and micromotor are used for graft extraction, a sapphire blade and holder for channel opening, a DHI implanter pen and needle or placing forceps for implantation, and jeweler forceps, a counting tray, petri dishes and a cooled holding box for graft preparation. Sterile drapes, gloves, syringes, needles and sponges are the consumables used up per case.

The common choices are 0.7–0.8 mm for single and double follicular units, 0.85–0.95 mm for multi-unit grafts and coarse hair, and 0.9–1.0 mm for beard and body donor. Edge type (sharp, blunt, hybrid) and shaft compatibility are assessed along with the diameter.

A sapphire blade only opens the channel; the graft is then placed with forceps. A DHI implanter pen opens the channel and places the graft in one motion. A sapphire blade is a single-use blade; with a DHI pen the body is reused and the needle is single-use.

A typical 3,000-graft case uses 2–3 punches per diameter and 2–4 sapphire blades per width. Spares are kept on hand against loss of sharpness in long sessions.

Hair transplant instruments, devices and consumables are priced by quotation. Add the products to your quote list and state your monthly case volume; a quotation based on the quantity tier is sent within 1 business day.

Obtenga una cotización de los productos de esta guía

Envíe los productos y cantidades de la guía; preparamos una cotización en PDF en 1 día laborable.