Saltar para o conteúdo

How to Choose a PRP Kit: Tube Types and Kit Contents

Choosing PRP kits and PRP tubes: the difference between gel-separator, sodium citrate and A-PRF tubes, 8–10 ml volume and tubes per session, single-procedure kit contents, centrifuge speed and time principles, storage and shelf life, and a buying checklist for clinics.

14 min de leituraAtualizado em 18 de novembro de 2026
Este conteúdo é informação técnica para profissionais de saúde e não constitui aconselhamento médico.
PRP application kit, gel-separator PRP tube and syringe illustration – cover of the PRP kit buying guide
A PRP kit packs one session's consumables in one sterile box; the right kit is chosen by tube type.

Short answer

A PRP kit packs all consumables of one platelet-rich plasma (PRP) session in one sterile box: two PRP tubes, a butterfly blood collection set, syringes, mesotherapy needles, a luer connector, alcohol swabs and a sterile drape. The right kit is chosen by tube type: a gel-separator tube for standard, fast separation, a sodium citrate (gel-free) tube to draw the buffy coat separately or to double-spin, and an anticoagulant-free A-PRF tube for a fibrin matrix. Scalp applications commonly use 10 ml tubes and two tubes per session; the centrifuge is not part of the kit, and a benchtop unit that takes 16×100 mm tubes is enough.

What PRP is and why the kit is bought as one pack

Platelet-rich plasma is the plasma fraction of the patient's own blood, separated by centrifugation, with a platelet concentration above whole blood. Growth factors in the platelet alpha granules (PDGF, TGF-β, VEGF, EGF) take part in tissue repair, which is why PRP is used in hair-loss treatment, donor-area preparation before hair transplantation and graft support afterwards, skin rejuvenation, orthopaedics and dentistry. Indication and protocol are the physician's responsibility; this guide covers consumable selection only.

One PRP session needs at least seven consumable items, and buying each from a different supplier brings mismatches (tube to holder, needle to syringe), missing items and non-sterile packs. A PRP set removes that risk: every component arrives under one lot, sterile and counted per session. High-volume clinics can also buy tubes in boxes of 50 and the other consumables by the case to build their own sets; both models are priced by quotation.

PRP tube types: gel separator, citrate and PRF

The tube is the consumable that decides PRP quality. There are three types, each supporting a different protocol.

Tube type Additive After centrifugation Separation Who it suits
Gel-separator PRP tube Sodium citrate + separator gel Gel barrier permanently separates red cells from plasma Automatic; drawn directly with a syringe Clinics wanting standard, fast, operator-independent preparation
Sodium citrate (gel-free) tube 3.2% sodium citrate Plasma, buffy coat and red cell layers stand free Manual; each layer drawn separately Experienced teams targeting double spins and higher concentration
A-PRF tube Plain glass Blood clots naturally; a fibrin matrix forms Clot or liquid i-PRF is taken Hair, dental and dermatology protocols that want a fibrin matrix

The gel-separator tube is the most common choice: after the spin the gel forms a stable wall between red cells and plasma; the layer stays intact even if the tube tilts and the plasma is drawn without red cell contamination. The gel-free citrate tube gives more control: a soft spin separates the plasma, a hard spin concentrates the platelets, and the buffy coat can be taken separately. The PRF tube is a different product; with no anticoagulant the blood clots in the tube and platelets and leukocytes are trapped in a three-dimensional fibrin network. Glass is used because the glass surface starts clotting.

Which PRP tube is "the best"?

There is no single answer; the best tube is the one that fits the clinic's protocol. Four preconditions apply to every type: the tube must be sterile and vacuum-sealed, a ÜTS-registered medical device, within its expiry date, and its vacuum must be set for the correct blood-to-anticoagulant ratio. A tube with weak vacuum or past its date under-fills, distorts the citrate ratio and lowers platelet yield.

Volume and tubes per session

PRP tubes come in 8 ml and 10 ml, in the standard 16×100 mm size. Volume follows the treated area:

Application Usual volume Tubes per session Note
Scalp (hair mesotherapy, before/after transplant) 10 ml 2 Large area; two tubes give 4–6 ml PRP
Face and neck rejuvenation 8–10 ml 1–2 Area and technique (mesotherapy, microneedling) decide
Small areas (periorbital, hands) 8 ml 1 One tube is often enough
Orthopaedics, intra-articular 10 ml 2–3 Per the physician's target platelet concentration

Not all of the tube volume becomes PRP: 10 ml of blood yields 2–4 ml of platelet-rich plasma depending on the protocol. Plan sessions monthly; tubes are bought in boxes of 50, kits per set, with a monthly shipment schedule for recurring use.

Gel-separator PRP tube and plain glass PRF tube illustration – PRP tube types

Tube types

Gel separator, citrate and A-PRF tubes

The gel barrier permanently separates plasma from red cells; in the PRF tube the blood clots naturally.

PRP kit contents: checklist

A single-procedure PRP kit should contain the following items; a missing item stops the session.

  1. 2 × PRP tube — gel separator or citrate; 10 ml.
  2. 21G butterfly collection set with holder — direct draw into the vacuum tube; 21G is the standard gauge that limits haemolysis.
  3. 2 × 10 ml syringe — to draw the PRP from the tube.
  4. 4 × 1 ml syringe — to split the application doses.
  5. 4 × 30G and 4 × 32G mesotherapy needle — 4 mm and 13 mm lengths for scalp and face.
  6. 1 × luer connector — tube-to-syringe or syringe-to-syringe transfer.
  7. 4 × alcohol swab and 1 × sterile drape — venepuncture antisepsis and a sterile working field.

Items not in the kit and planned separately: examination gloves, tape, a sharps container, topical anaesthetic and cold packs. They are added to the same quotation from medical consumables.

Centrifuge: speed, time and balance

PRP kits do not include a centrifuge. The clinic needs a benchtop unit that accepts 16×100 mm tubes; an 8-tube fixed-angle rotor with digital speed and time and program memory covers daily use.

  • Speed and g-force: manufacturers define protocols in g-force, not rpm; the same rpm gives a different g at a different rotor radius. Reach the g-force the tube manufacturer recommends and do not go below it, or the gel barrier will not form.
  • Single and double spin: one spin is enough for the gel-separator tube. The gel-free citrate tube takes a low-speed soft spin first, then a high-speed hard spin of the plasma; platelets collect at the bottom and are resuspended in the wanted volume.
  • PRF protocols: a short, low-speed spin gives liquid i-PRF, a longer spin an A-PRF clot. Without anticoagulant, tubes go into the centrifuge immediately after collection.
  • Balance: always load the rotor opposite and with equal fill; use a water-filled balance tube for a single tube. The imbalance sensor stops the unit on wrong loading, but balanced loading protects rotor life.
PRP kit, syringe and mesotherapy needle illustration – PRP kit contents

Kit contents

Single-procedure PRP kit checklist

A missing item stops the session: kit contents are counted against the list at delivery.

Storage, shelf life and lot tracking

PRP and PRF tubes are stored at room temperature, away from direct sunlight, in unopened packs. Vacuum decreases over time, so expired tubes are never used and stock rotates first-in, first-out. Lot number and expiry date are on the box label and the delivery note; recording the tube lot in the patient file is recommended for traceability. Kits are sterile and single-use; an opened kit is not used in another session.

Benchtop PRP centrifuge and PRP tube illustration – speed, time and balance rules

Centrifuge

Speed, time and balance

The manufacturer's recommended g-force must be reached for the gel barrier to form.

What sets PRP kit prices

PRP kit and PRP tube prices are set by quotation, not from a list. The main factors:

  • Tube type: the gel-separator tube is priced differently from the citrate tube, and the PRF tube from standard tubes because of the glass.
  • Quantity and period: boxes of 50, case quantities and a monthly shipment schedule bring tiered prices.
  • Kit contents: needle count and gauges, syringe count and the sterile drape define the set's cost.
  • Documents: ÜTS-registered, CE-marked medical devices differ from undocumented products; a cheaper undocumented tube is a risk for the clinic.

In the quote request, state your monthly session count and tube type; unit, box and case prices are listed separately and the quotation is sent as a PDF within 1 business day.

Buying checklist for the clinic

  • Which tube does your protocol need: gel separator, citrate or PRF?
  • Do the volume and tubes per session match the monthly session plan?
  • Are the tubes 16×100 mm and does your centrifuge rotor accept that size?
  • Is the kit complete: 2 tubes, butterfly set, 10 ml and 1 ml syringes, 30G/32G needles, connector, swabs, drape?
  • Are the products sterile, vacuum-sealed and ÜTS-registered, with at least 12 months to expiry?
  • Were gloves, tape, sharps container and anaesthetic consumables added to the same quotation?
  • Is a monthly shipment schedule set up for recurring use?

Products

The PRP Tubes and Kits category lists the gel-separator PRP tube, the sodium citrate PRP tube, the A-PRF tube, the single-procedure PRP kit and the 8-tube PRP centrifuge. See the PRP tube selection guide for a detailed tube comparison and hair transplant supplies for the full hair catalogue; send your list through a quote request.

Perguntas frequentes

A PRP kit is a set that brings all the consumables of one PRP session together in a single sterile pack: two PRP tubes, a 21G butterfly blood collection set with holder, 10 ml and 1 ml syringes, 30G and 32G mesotherapy needles, a luer connector, alcohol swabs and a sterile drape. The centrifuge is not part of the kit.

A PRP tube contains sodium citrate anticoagulant and gives liquid plasma after centrifugation. A PRF tube is plain glass; the blood clots naturally and a fibrin matrix forms that traps the platelets. PRF contains no additives and is applied immediately after the blood is collected.

The gel-separator tube is chosen for standard, fast, operator-independent preparation; the gel-free citrate tube is for experienced teams that want to draw the buffy coat separately or raise platelet concentration with a double spin. Both tubes are used with the same butterfly set and centrifuge.

Scalp applications commonly use 10 ml tubes and two tubes per session; for facial applications one or two tubes, and for small areas one tube, may be enough. 10 ml of blood yields 2–4 ml of PRP depending on the protocol; the final number depends on the physician's protocol.

Because the tubes are the standard 16×100 mm size, they can be used with any benchtop centrifuge that accepts that size. Speed and time are set according to the g-force the tube manufacturer recommends; the rotor is loaded opposite and with equal fill, and a balance tube is used for a single tube.

Prices are set by quotation; tube type, monthly session count, box and case quantities, kit contents and the products' ÜTS/CE documents affect the price. State your session count and tube type in the quote request; unit, box and case prices are sent in a PDF quotation within 1 business day.

They are stored at room temperature, away from sunlight and in unopened packs. Because the vacuum decreases over time, expired tubes are not used; stock rotates first-in, first-out. The lot number and expiry date are on the box and the delivery note.

Mais guias

Todos os guias

Obtenha um orçamento para os produtos deste guia

Envie os produtos e quantidades do guia; preparamos um orçamento em PDF em 1 dia útil.