Saltar para o conteúdo

Graft Storage Solution and Graft Viability Guide

Choosing a graft storage solution and the routine that protects graft viability: saline, Ringer's lactate and hypothermic solutions compared, 4–8 °C cold holding, glass petri dishes and counting trays, sorting by hair count, team workflow and a clinic supply checklist.

12 min de leituraAtualizado em 18 de novembro de 2026
Este conteúdo é informação técnica para profissionais de saúde e não constitui aconselhamento médico.
Glass petri dish, sorting forceps and solution gallipot illustration – cover of the graft storage solution guide
Grafts are kept cold, moist and protected until implantation; solution and protocol are the physician's decision.

Short answer

A graft storage solution is the liquid in which follicular units harvested by FUE wait until they are implanted; its job is to keep grafts from drying out, warming up or being damaged mechanically. The options most clinics use are normal saline (0.9% NaCl) and Ringer's lactate; some centres prefer hypothermic storage solutions developed for cell preservation. The routine matters as much as the solution: grafts are kept moist in solution in glass petri dishes on a tray cooled to about 4–8 °C, sorted and counted by hair number, and their time out of the body is kept short. Which solution and protocol are used is the physician's decision; this article covers only the supplies and the workflow.

What affects graft viability?

From the moment a graft leaves the body until it is placed in its incision, it waits without a blood supply. Graft viability during that wait is protected against four factors:

Risk What happens Supply-side measure
Drying (dehydration) The graft surface dries quickly, and dried cells do not recover Grafts kept in solution, lidded petri dishes, regular moistening
Warming Room and lamp heat raise the cells' energy demand Cooled tray, cold holding at 4–8 °C, placed away from the lamp
Mechanical damage Squeezing with forceps, gripping the bulb, crushing Fine-tipped sorting and implantation forceps, gripping the surrounding tissue
Long waiting time Risk rises the longer grafts stay out of the body Matching the pace of extraction, sorting and implantation; working in counted batches

Three of these four factors are purely a matter of supplies and organisation: the right dish, the right temperature, the right forceps and a well-planned team flow.

Types of graft storage solution

Clinics generally use one of three groups of solution. The table summarises the differences; the choice and protocol belong to the physician.

Solution Composition Key feature Note
Normal saline (0.9% NaCl) Isotonic salt water Common, easy to source, economical The standard holding liquid in many clinics
Ringer's lactate Electrolytes + lactate Electrolyte balance closer to plasma Used as an alternative to saline
Hypothermic storage solutions Buffers and protective components formulated for cold storage Designed to protect cells at low temperature Some centres prefer them for longer procedures

Some clinics follow protocols that add ATP or similar additives to the holding liquid; these depend on the physician's assessment and are not a standard requirement. Whatever liquid is chosen, three rules stay the same: it must be sterile, within its expiry date, and once opened used only for that procedure.

Cold holding: 4–8 °C and the cold chain

In graft storage, temperature is as decisive as the solution. In practice the petri dishes holding the grafts sit on a tray cooled with ice or a cooling unit, at roughly 4–8 °C. Points to watch:

  • Grafts must not freeze; ice never touches the grafts or the solution directly and stays beneath the petri dish.
  • Solution bottles are kept in the refrigerator before the procedure; the amount needed is poured into a sterile gallipot or petri dish.
  • The cooling tray is not placed directly under the surgical lamp; heat and light speed up drying.
  • In long procedures the ice or coolant is replaced regularly and the temperature is checked with a thermometer.
Solution gallipot and tube illustration – types of graft storage solution

Solutions

Saline, Ringer's lactate and hypothermic solution

Whatever liquid is chosen, it must be sterile, in date and used for one procedure only.

Petri dishes, counting trays and the sorting table

In most clinics grafts wait in a borosilicate glass petri dish: it is reusable, autoclavable and transparent, so grafts are easy to see under loupes or a microscope. Small dishes keep single, double and triple groups apart; large dishes are used for bulk holding. For counting, a gridded template can be placed under the dish, or grafts are laid out in rows of ten.

The sorting table should be lit, flat and easy to clean. It should hold, at the same time: the cooled tray, petri dishes, a solution gallipot, sorting forceps, loupes or a microscope, sterile swabs and the count sheet.

Sorting and arranging grafts by hair count

The sorting team separates harvested grafts by hair count: single-hair grafts are usually planned for the frontal hairline, two- and three-hair grafts for the mid and rear areas. While sorting:

  • Grafts are held by the surrounding tissue, not the bulb, using fine, precise sorting forceps.
  • Each group is kept in its own petri dish or a separate section of the same dish.
  • Each dish is labelled with group and count; the count sheet is updated throughout the procedure.
  • Grafts go to the implantation team in small batches, so each batch spends only a short time out of the body.

For forceps types and tip choice, see our hair transplant forceps types guide.

Glass petri dish and sorting table illustration – cold holding of grafts

Cold holding

Petri dishes, cooled tray and sorting table

Ice stays beneath the petri dish and never touches the grafts or solution directly.

Team workflow: pacing extraction, sorting and implantation

The most effective way to shorten the time grafts spend out of the body is to match the pace of extraction and implantation. A typical routine:

Stage Who Supplies Checkpoint
Extraction Physician + extraction team FUE punch, micromotor, extraction forceps Grafts go into solution immediately
Sorting and counting Sorting team Petri dishes, cooled tray, sorting forceps, loupes Separated into groups and entered on the count sheet
Incisions Physician Sapphire blade / slit blade, blade handle Incision count matched to graft count
Implantation Implantation team Implantation forceps or DHI implanter pen Grafts taken in small batches

This table is a general example; the order and overlap of stages vary with the clinic's technique (FUE, DHI, combined) and the physician's protocol.

Clinic checklist for graft storage

Before the procedure, make sure the following are ready:

  • Is the chosen storage solution (saline, Ringer's lactate or a hypothermic solution) available in sufficient quantity, sterile and in date?
  • Has the solution been chilled before the procedure; is the ice or cooling unit ready?
  • Are there enough glass petri dishes (small and large) and have they been sterilised?
  • Are the cooling tray, sterile gallipot and steel tray on the instrument table?
  • Are there enough sorting, extraction and implantation forceps (2–3 sets) to cover the sterilisation cycle?
  • Are the loupes or microscope and the lit sorting table working?
  • Are 10 ml syringes for drawing and moistening, sterile swabs and gloves ready?
  • Have the count sheet and dish labels been prepared?
Sorting forceps and petri dish illustration – separating grafts by hair count

Workflow

Sorting by hair count and implanting in batches

When extraction and implantation are paced together, each batch spends only a short time out of the body.

What to check when buying

  • Solution: sterile, ÜTS-registered and with several months to expiry; planned by the case according to monthly procedure numbers.
  • Petri dishes: borosilicate glass, autoclavable, lidded; in two diameters and in numbers that cover the sterilisation cycle.
  • Forceps: stainless steel with fine, aligned tips; separate sorting, extraction and implantation forceps.
  • Ancillary supplies: steel trays, gallipots, syringes, swabs and gloves added to the same quotation.
  • Lot tracking: the lot number and expiry date of the solution and sterile consumables should appear on the delivery note.

Products

For graft preparation and holding we list the glass petri dish, sorting forceps, extraction forceps, implantation forceps, steel tray and stainless steel gallipot; the 10 ml syringe for drawing solution and the IV set can be added to the same quotation. The categories are hair transplant, hair transplant forceps, surgical instruments and syringes. For the full instrument list see the instruments used in hair transplantation and hair transplant clinic equipment checklist guides, and hair transplant supplies for the whole catalogue; send your list through a quote request.

Perguntas frequentes

A graft storage solution is the sterile liquid in which follicular units harvested by FUE wait until they are implanted. Its purpose is to keep grafts from drying out and warming up. The most common options in clinics are normal saline and Ringer's lactate; some centres use hypothermic storage solutions. The choice belongs to the physician.

Both liquids are used for graft storage in clinics. Normal saline is isotonic salt water and the most common option; Ringer's lactate offers an electrolyte balance closer to plasma. Which one is used depends on the physician's protocol; on the supply side, what matters is that the liquid is sterile and within its expiry date.

It would not be right to give an exact time; it depends on the solution, the temperature, the condition of the graft and the physician's protocol. The general principle is to keep the time out of the body as short as possible and to hold grafts in a cold, moist and protected environment. Matching the pace of extraction and implantation is the most effective way to shorten this time.

In practice grafts are kept in petri dishes on a cooled tray, at roughly 4–8 °C. Grafts must not freeze; ice does not touch the graft or the solution directly. The cooling tray is not placed directly under the surgical lamp, and in long procedures the temperature is checked.

A borosilicate glass petri dish is transparent, so grafts are easy to see under loupes or a microscope; it is reusable and autoclavable. Small dishes are used to keep graft groups apart, large dishes for bulk holding. Enough dishes should be kept to cover the sterilisation cycle.

Storage solution, glass petri dishes, a cooling tray and ice or a cooling unit, a sterile gallipot and steel tray, sorting, extraction and implantation forceps, loupes or a microscope, 10 ml syringes, sterile swabs, gloves and the count sheet make up the basic list.

Items such as petri dishes, forceps, trays, gallipots and syringes can be combined in a single quote request. Send your monthly procedure numbers and your list of needs through the quote form; a written quotation with quantities, cases and delivery time is sent as a PDF within 1 business day.

Mais guias

Todos os guias

Obtenha um orçamento para os produtos deste guia

Envie os produtos e quantidades do guia; preparamos um orçamento em PDF em 1 dia útil.